Waste Water Treatment

ARTEX M-DCA

  • Excellent decoloring flocculants for high colour intensity wastewater treatment.
  • Cationic polymer highly effective for decoloring and COD reduction.
  • Decoloring, flocculating and reducing COD Rate of decoloring is >95% for dyes wastewater COD reduction is between 40~75%
  • This product shall be diluted with water 10~50 times
  • Adjust wastewater pH 4~11, this product perform best pH 7~8
  • Dose and stir for a few moment until flocculants is formed.
  • It can be precipitated or air-floatedor filtered to obtain clear water.
  • If the raw wastewater contain high COD value or deep colour, we suggest to use inorganic salts, this will reduce the treatment cost.
  • The chemical dosage depends on floc formation and nature of wastewater.

PURPOSE: Decolouring agent
IONIC STAGE: Cationic
USAGE: 5.0 – 200 g/m3